{
  "language": "Solidity",
  "sources": {
    "@openzeppelin/contracts/access/Ownable.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\npragma solidity ^0.8.20;\n\nimport {Context} from \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n"
    },
    "@openzeppelin/contracts/access/Ownable2Step.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (access/Ownable2Step.sol)\n\npragma solidity ^0.8.20;\n\nimport {Ownable} from \"./Ownable.sol\";\n\n/**\n * @dev Contract module which provides access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * This extension of the {Ownable} contract includes a two-step mechanism to transfer\n * ownership, where the new owner must call {acceptOwnership} in order to replace the\n * old one. This can help prevent common mistakes, such as transfers of ownership to\n * incorrect accounts, or to contracts that are unable to interact with the\n * permission system.\n *\n * The initial owner is specified at deployment time in the constructor for `Ownable`. This\n * can later be changed with {transferOwnership} and {acceptOwnership}.\n *\n * This module is used through inheritance. It will make available all functions\n * from parent (Ownable).\n */\nabstract contract Ownable2Step is Ownable {\n    address private _pendingOwner;\n\n    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Returns the address of the pending owner.\n     */\n    function pendingOwner() public view virtual returns (address) {\n        return _pendingOwner;\n    }\n\n    /**\n     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.\n     * Can only be called by the current owner.\n     *\n     * Setting `newOwner` to the zero address is allowed; this can be used to cancel an initiated ownership transfer.\n     */\n    function transferOwnership(address newOwner) public virtual override onlyOwner {\n        _pendingOwner = newOwner;\n        emit OwnershipTransferStarted(owner(), newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual override {\n        delete _pendingOwner;\n        super._transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev The new owner accepts the ownership transfer.\n     */\n    function acceptOwnership() public virtual {\n        address sender = _msgSender();\n        if (pendingOwner() != sender) {\n            revert OwnableUnauthorizedAccount(sender);\n        }\n        _transferOwnership(sender);\n    }\n}\n"
    },
    "@openzeppelin/contracts/interfaces/IERC1363.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1363.sol)\n\npragma solidity >=0.6.2;\n\nimport {IERC20} from \"./IERC20.sol\";\nimport {IERC165} from \"./IERC165.sol\";\n\n/**\n * @title IERC1363\n * @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].\n *\n * Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract\n * after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.\n */\ninterface IERC1363 is IERC20, IERC165 {\n    /*\n     * Note: the ERC-165 identifier for this interface is 0xb0202a11.\n     * 0xb0202a11 ===\n     *   bytes4(keccak256('transferAndCall(address,uint256)')) ^\n     *   bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^\n     *   bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^\n     *   bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^\n     *   bytes4(keccak256('approveAndCall(address,uint256)')) ^\n     *   bytes4(keccak256('approveAndCall(address,uint256,bytes)'))\n     */\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferAndCall(address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @param data Additional data with no specified format, sent in call to `to`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param from The address which you want to send tokens from.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferFromAndCall(address from, address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param from The address which you want to send tokens from.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @param data Additional data with no specified format, sent in call to `to`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.\n     * @param spender The address which will spend the funds.\n     * @param value The amount of tokens to be spent.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function approveAndCall(address spender, uint256 value) external returns (bool);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.\n     * @param spender The address which will spend the funds.\n     * @param value The amount of tokens to be spent.\n     * @param data Additional data with no specified format, sent in call to `spender`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);\n}\n"
    },
    "@openzeppelin/contracts/interfaces/IERC165.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC165.sol)\n\npragma solidity >=0.4.16;\n\nimport {IERC165} from \"../utils/introspection/IERC165.sol\";\n"
    },
    "@openzeppelin/contracts/interfaces/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC20.sol)\n\npragma solidity >=0.4.16;\n\nimport {IERC20} from \"../token/ERC20/IERC20.sol\";\n"
    },
    "@openzeppelin/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/IERC20.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev Interface of the ERC-20 standard as defined in the ERC.\n */\ninterface IERC20 {\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n\n    /**\n     * @dev Returns the value of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the value of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender's allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the\n     * allowance mechanism. `value` is then deducted from the caller's\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 value) external returns (bool);\n}\n"
    },
    "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"../IERC20.sol\";\nimport {IERC1363} from \"../../../interfaces/IERC1363.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC-20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n    /**\n     * @dev An operation with an ERC-20 token failed.\n     */\n    error SafeERC20FailedOperation(address token);\n\n    /**\n     * @dev Indicates a failed `decreaseAllowance` request.\n     */\n    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);\n\n    /**\n     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     */\n    function safeTransfer(IERC20 token, address to, uint256 value) internal {\n        if (!_safeTransfer(token, to, value, true)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the\n     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.\n     */\n    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {\n        if (!_safeTransferFrom(token, from, to, value, true)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.\n     */\n    function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {\n        return _safeTransfer(token, to, value, false);\n    }\n\n    /**\n     * @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.\n     */\n    function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {\n        return _safeTransferFrom(token, from, to, value, false);\n    }\n\n    /**\n     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     *\n     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the \"client\"\n     * smart contract uses ERC-7674 to set temporary allowances, then the \"client\" smart contract should avoid using\n     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract\n     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.\n     */\n    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n        uint256 oldAllowance = token.allowance(address(this), spender);\n        forceApprove(token, spender, oldAllowance + value);\n    }\n\n    /**\n     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no\n     * value, non-reverting calls are assumed to be successful.\n     *\n     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the \"client\"\n     * smart contract uses ERC-7674 to set temporary allowances, then the \"client\" smart contract should avoid using\n     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract\n     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.\n     */\n    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {\n        unchecked {\n            uint256 currentAllowance = token.allowance(address(this), spender);\n            if (currentAllowance < requestedDecrease) {\n                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);\n            }\n            forceApprove(token, spender, currentAllowance - requestedDecrease);\n        }\n    }\n\n    /**\n     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval\n     * to be set to zero before setting it to a non-zero value, such as USDT.\n     *\n     * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function\n     * only sets the \"standard\" allowance. Any temporary allowance will remain active, in addition to the value being\n     * set here.\n     */\n    function forceApprove(IERC20 token, address spender, uint256 value) internal {\n        if (!_safeApprove(token, spender, value, false)) {\n            if (!_safeApprove(token, spender, 0, true)) revert SafeERC20FailedOperation(address(token));\n            if (!_safeApprove(token, spender, value, true)) revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no\n     * code. This can be used to implement an {ERC721}-like safe transfer that relies on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {\n        if (to.code.length == 0) {\n            safeTransfer(token, to, value);\n        } else if (!token.transferAndCall(to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target\n     * has no code. This can be used to implement an {ERC721}-like safe transfer that relies on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function transferFromAndCallRelaxed(\n        IERC1363 token,\n        address from,\n        address to,\n        uint256 value,\n        bytes memory data\n    ) internal {\n        if (to.code.length == 0) {\n            safeTransferFrom(token, from, to, value);\n        } else if (!token.transferFromAndCall(from, to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no\n     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.\n     * Oppositely, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}\n     * once without retrying, and relies on the returned value to be true.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {\n        if (to.code.length == 0) {\n            forceApprove(token, to, value);\n        } else if (!token.approveAndCall(to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity `token.transfer(to, value)` call, relaxing the requirement on the return value: the\n     * return value is optional (but if data is returned, it must not be false).\n     *\n     * @param token The token targeted by the call.\n     * @param to The recipient of the tokens\n     * @param value The amount of token to transfer\n     * @param bubble Behavior switch if the transfer call reverts: bubble the revert reason or return a false boolean.\n     */\n    function _safeTransfer(IERC20 token, address to, uint256 value, bool bubble) private returns (bool success) {\n        bytes4 selector = IERC20.transfer.selector;\n\n        assembly (\"memory-safe\") {\n            let fmp := mload(0x40)\n            mstore(0x00, selector)\n            mstore(0x04, and(to, shr(96, not(0))))\n            mstore(0x24, value)\n            success := call(gas(), token, 0, 0x00, 0x44, 0x00, 0x20)\n            // if call success and return is true, all is good.\n            // otherwise (not success or return is not true), we need to perform further checks\n            if iszero(and(success, eq(mload(0x00), 1))) {\n                // if the call was a failure and bubble is enabled, bubble the error\n                if and(iszero(success), bubble) {\n                    returndatacopy(fmp, 0x00, returndatasize())\n                    revert(fmp, returndatasize())\n                }\n                // if the return value is not true, then the call is only successful if:\n                // - the token address has code\n                // - the returndata is empty\n                success := and(success, and(iszero(returndatasize()), gt(extcodesize(token), 0)))\n            }\n            mstore(0x40, fmp)\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity `token.transferFrom(from, to, value)` call, relaxing the requirement on the return\n     * value: the return value is optional (but if data is returned, it must not be false).\n     *\n     * @param token The token targeted by the call.\n     * @param from The sender of the tokens\n     * @param to The recipient of the tokens\n     * @param value The amount of token to transfer\n     * @param bubble Behavior switch if the transfer call reverts: bubble the revert reason or return a false boolean.\n     */\n    function _safeTransferFrom(\n        IERC20 token,\n        address from,\n        address to,\n        uint256 value,\n        bool bubble\n    ) private returns (bool success) {\n        bytes4 selector = IERC20.transferFrom.selector;\n\n        assembly (\"memory-safe\") {\n            let fmp := mload(0x40)\n            mstore(0x00, selector)\n            mstore(0x04, and(from, shr(96, not(0))))\n            mstore(0x24, and(to, shr(96, not(0))))\n            mstore(0x44, value)\n            success := call(gas(), token, 0, 0x00, 0x64, 0x00, 0x20)\n            // if call success and return is true, all is good.\n            // otherwise (not success or return is not true), we need to perform further checks\n            if iszero(and(success, eq(mload(0x00), 1))) {\n                // if the call was a failure and bubble is enabled, bubble the error\n                if and(iszero(success), bubble) {\n                    returndatacopy(fmp, 0x00, returndatasize())\n                    revert(fmp, returndatasize())\n                }\n                // if the return value is not true, then the call is only successful if:\n                // - the token address has code\n                // - the returndata is empty\n                success := and(success, and(iszero(returndatasize()), gt(extcodesize(token), 0)))\n            }\n            mstore(0x40, fmp)\n            mstore(0x60, 0)\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity `token.approve(spender, value)` call, relaxing the requirement on the return value:\n     * the return value is optional (but if data is returned, it must not be false).\n     *\n     * @param token The token targeted by the call.\n     * @param spender The spender of the tokens\n     * @param value The amount of token to transfer\n     * @param bubble Behavior switch if the transfer call reverts: bubble the revert reason or return a false boolean.\n     */\n    function _safeApprove(IERC20 token, address spender, uint256 value, bool bubble) private returns (bool success) {\n        bytes4 selector = IERC20.approve.selector;\n\n        assembly (\"memory-safe\") {\n            let fmp := mload(0x40)\n            mstore(0x00, selector)\n            mstore(0x04, and(spender, shr(96, not(0))))\n            mstore(0x24, value)\n            success := call(gas(), token, 0, 0x00, 0x44, 0x00, 0x20)\n            // if call success and return is true, all is good.\n            // otherwise (not success or return is not true), we need to perform further checks\n            if iszero(and(success, eq(mload(0x00), 1))) {\n                // if the call was a failure and bubble is enabled, bubble the error\n                if and(iszero(success), bubble) {\n                    returndatacopy(fmp, 0x00, returndatasize())\n                    revert(fmp, returndatasize())\n                }\n                // if the return value is not true, then the call is only successful if:\n                // - the token address has code\n                // - the returndata is empty\n                success := and(success, and(iszero(returndatasize()), gt(extcodesize(token), 0)))\n            }\n            mstore(0x40, fmp)\n        }\n    }\n}\n"
    },
    "@openzeppelin/contracts/token/ERC721/IERC721.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC721/IERC721.sol)\n\npragma solidity >=0.6.2;\n\nimport {IERC165} from \"../../utils/introspection/IERC165.sol\";\n\n/**\n * @dev Required interface of an ERC-721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC-721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC-721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n"
    },
    "@openzeppelin/contracts/utils/Context.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n"
    },
    "@openzeppelin/contracts/utils/ReentrancyGuard.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/ReentrancyGuard.sol)\n\npragma solidity ^0.8.20;\n\nimport {StorageSlot} from \"./StorageSlot.sol\";\n\n/**\n * @dev Contract module that helps prevent reentrant calls to a function.\n *\n * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier\n * available, which can be applied to functions to make sure there are no nested\n * (reentrant) calls to them.\n *\n * Note that because there is a single `nonReentrant` guard, functions marked as\n * `nonReentrant` may not call one another. This can be worked around by making\n * those functions `private`, and then adding `external` `nonReentrant` entry\n * points to them.\n *\n * TIP: If EIP-1153 (transient storage) is available on the chain you're deploying at,\n * consider using {ReentrancyGuardTransient} instead.\n *\n * TIP: If you would like to learn more about reentrancy and alternative ways\n * to protect against it, check out our blog post\n * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].\n *\n * IMPORTANT: Deprecated. This storage-based reentrancy guard will be removed and replaced\n * by the {ReentrancyGuardTransient} variant in v6.0.\n *\n * @custom:stateless\n */\nabstract contract ReentrancyGuard {\n    using StorageSlot for bytes32;\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.ReentrancyGuard\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant REENTRANCY_GUARD_STORAGE =\n        0x9b779b17422d0df92223018b32b4d1fa46e071723d6817e2486d003becc55f00;\n\n    // Booleans are more expensive than uint256 or any type that takes up a full\n    // word because each write operation emits an extra SLOAD to first read the\n    // slot's contents, replace the bits taken up by the boolean, and then write\n    // back. This is the compiler's defense against contract upgrades and\n    // pointer aliasing, and it cannot be disabled.\n\n    // The values being non-zero value makes deployment a bit more expensive,\n    // but in exchange the refund on every call to nonReentrant will be lower in\n    // amount. Since refunds are capped to a percentage of the total\n    // transaction's gas, it is best to keep them low in cases like this one, to\n    // increase the likelihood of the full refund coming into effect.\n    uint256 private constant NOT_ENTERED = 1;\n    uint256 private constant ENTERED = 2;\n\n    /**\n     * @dev Unauthorized reentrant call.\n     */\n    error ReentrancyGuardReentrantCall();\n\n    constructor() {\n        _reentrancyGuardStorageSlot().getUint256Slot().value = NOT_ENTERED;\n    }\n\n    /**\n     * @dev Prevents a contract from calling itself, directly or indirectly.\n     * Calling a `nonReentrant` function from another `nonReentrant`\n     * function is not supported. It is possible to prevent this from happening\n     * by making the `nonReentrant` function external, and making it call a\n     * `private` function that does the actual work.\n     */\n    modifier nonReentrant() {\n        _nonReentrantBefore();\n        _;\n        _nonReentrantAfter();\n    }\n\n    /**\n     * @dev A `view` only version of {nonReentrant}. Use to block view functions\n     * from being called, preventing reading from inconsistent contract state.\n     *\n     * CAUTION: This is a \"view\" modifier and does not change the reentrancy\n     * status. Use it only on view functions. For payable or non-payable functions,\n     * use the standard {nonReentrant} modifier instead.\n     */\n    modifier nonReentrantView() {\n        _nonReentrantBeforeView();\n        _;\n    }\n\n    function _nonReentrantBeforeView() private view {\n        if (_reentrancyGuardEntered()) {\n            revert ReentrancyGuardReentrantCall();\n        }\n    }\n\n    function _nonReentrantBefore() private {\n        // On the first call to nonReentrant, _status will be NOT_ENTERED\n        _nonReentrantBeforeView();\n\n        // Any calls to nonReentrant after this point will fail\n        _reentrancyGuardStorageSlot().getUint256Slot().value = ENTERED;\n    }\n\n    function _nonReentrantAfter() private {\n        // By storing the original value once again, a refund is triggered (see\n        // https://eips.ethereum.org/EIPS/eip-2200)\n        _reentrancyGuardStorageSlot().getUint256Slot().value = NOT_ENTERED;\n    }\n\n    /**\n     * @dev Returns true if the reentrancy guard is currently set to \"entered\", which indicates there is a\n     * `nonReentrant` function in the call stack.\n     */\n    function _reentrancyGuardEntered() internal view returns (bool) {\n        return _reentrancyGuardStorageSlot().getUint256Slot().value == ENTERED;\n    }\n\n    function _reentrancyGuardStorageSlot() internal pure virtual returns (bytes32) {\n        return REENTRANCY_GUARD_STORAGE;\n    }\n}\n"
    },
    "@openzeppelin/contracts/utils/StorageSlot.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/StorageSlot.sol)\n// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Library for reading and writing primitive types to specific storage slots.\n *\n * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.\n * This library helps with reading and writing to such slots without the need for inline assembly.\n *\n * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.\n *\n * Example usage to set ERC-1967 implementation slot:\n * ```solidity\n * contract ERC1967 {\n *     // Define the slot. Alternatively, use the SlotDerivation library to derive the slot.\n *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n *\n *     function _getImplementation() internal view returns (address) {\n *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;\n *     }\n *\n *     function _setImplementation(address newImplementation) internal {\n *         require(newImplementation.code.length > 0);\n *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\n *     }\n * }\n * ```\n *\n * TIP: Consider using this library along with {SlotDerivation}.\n */\nlibrary StorageSlot {\n    struct AddressSlot {\n        address value;\n    }\n\n    struct BooleanSlot {\n        bool value;\n    }\n\n    struct Bytes32Slot {\n        bytes32 value;\n    }\n\n    struct Uint256Slot {\n        uint256 value;\n    }\n\n    struct Int256Slot {\n        int256 value;\n    }\n\n    struct StringSlot {\n        string value;\n    }\n\n    struct BytesSlot {\n        bytes value;\n    }\n\n    /**\n     * @dev Returns an `AddressSlot` with member `value` located at `slot`.\n     */\n    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `BooleanSlot` with member `value` located at `slot`.\n     */\n    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `Bytes32Slot` with member `value` located at `slot`.\n     */\n    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `Uint256Slot` with member `value` located at `slot`.\n     */\n    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `Int256Slot` with member `value` located at `slot`.\n     */\n    function getInt256Slot(bytes32 slot) internal pure returns (Int256Slot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `StringSlot` with member `value` located at `slot`.\n     */\n    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.\n     */\n    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := store.slot\n        }\n    }\n\n    /**\n     * @dev Returns a `BytesSlot` with member `value` located at `slot`.\n     */\n    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.\n     */\n    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := store.slot\n        }\n    }\n}\n"
    },
    "@openzeppelin/contracts/utils/cryptography/ECDSA.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.6.0) (utils/cryptography/ECDSA.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.\n *\n * These functions can be used to verify that a message was signed by the holder\n * of the private keys of a given address.\n */\nlibrary ECDSA {\n    enum RecoverError {\n        NoError,\n        InvalidSignature,\n        InvalidSignatureLength,\n        InvalidSignatureS\n    }\n\n    /**\n     * @dev The signature is invalid.\n     */\n    error ECDSAInvalidSignature();\n\n    /**\n     * @dev The signature has an invalid length.\n     */\n    error ECDSAInvalidSignatureLength(uint256 length);\n\n    /**\n     * @dev The signature has an S value that is in the upper half order.\n     */\n    error ECDSAInvalidSignatureS(bytes32 s);\n\n    /**\n     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not\n     * return address(0) without also returning an error description. Errors are documented using an enum (error type)\n     * and a bytes32 providing additional information about the error.\n     *\n     * If no error is returned, then the address can be used for verification purposes.\n     *\n     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:\n     * this function rejects them by requiring the `s` value to be in the lower\n     * half order, and the `v` value to be either 27 or 28.\n     *\n     * NOTE: This function only supports 65-byte signatures. ERC-2098 short signatures are rejected. This restriction\n     * is DEPRECATED and will be removed in v6.0. Developers SHOULD NOT use signatures as unique identifiers; use hash\n     * invalidation or nonces for replay protection.\n     *\n     * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n     * verification to be secure: it is possible to craft signatures that\n     * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n     * this is by receiving a hash of the original message (which may otherwise\n     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.\n     *\n     * Documentation for signature generation:\n     *\n     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]\n     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]\n     */\n    function tryRecover(\n        bytes32 hash,\n        bytes memory signature\n    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {\n        if (signature.length == 65) {\n            bytes32 r;\n            bytes32 s;\n            uint8 v;\n            // ecrecover takes the signature parameters, and the only way to get them\n            // currently is to use assembly.\n            assembly (\"memory-safe\") {\n                r := mload(add(signature, 0x20))\n                s := mload(add(signature, 0x40))\n                v := byte(0, mload(add(signature, 0x60)))\n            }\n            return tryRecover(hash, v, r, s);\n        } else {\n            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));\n        }\n    }\n\n    /**\n     * @dev Variant of {tryRecover} that takes a signature in calldata\n     */\n    function tryRecoverCalldata(\n        bytes32 hash,\n        bytes calldata signature\n    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {\n        if (signature.length == 65) {\n            bytes32 r;\n            bytes32 s;\n            uint8 v;\n            // ecrecover takes the signature parameters, calldata slices would work here, but are\n            // significantly more expensive (length check) than using calldataload in assembly.\n            assembly (\"memory-safe\") {\n                r := calldataload(signature.offset)\n                s := calldataload(add(signature.offset, 0x20))\n                v := byte(0, calldataload(add(signature.offset, 0x40)))\n            }\n            return tryRecover(hash, v, r, s);\n        } else {\n            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));\n        }\n    }\n\n    /**\n     * @dev Returns the address that signed a hashed message (`hash`) with\n     * `signature`. This address can then be used for verification purposes.\n     *\n     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:\n     * this function rejects them by requiring the `s` value to be in the lower\n     * half order, and the `v` value to be either 27 or 28.\n     *\n     * NOTE: This function only supports 65-byte signatures. ERC-2098 short signatures are rejected. This restriction\n     * is DEPRECATED and will be removed in v6.0. Developers SHOULD NOT use signatures as unique identifiers; use hash\n     * invalidation or nonces for replay protection.\n     *\n     * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n     * verification to be secure: it is possible to craft signatures that\n     * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n     * this is by receiving a hash of the original message (which may otherwise\n     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.\n     */\n    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {\n        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);\n        _throwError(error, errorArg);\n        return recovered;\n    }\n\n    /**\n     * @dev Variant of {recover} that takes a signature in calldata\n     */\n    function recoverCalldata(bytes32 hash, bytes calldata signature) internal pure returns (address) {\n        (address recovered, RecoverError error, bytes32 errorArg) = tryRecoverCalldata(hash, signature);\n        _throwError(error, errorArg);\n        return recovered;\n    }\n\n    /**\n     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.\n     *\n     * See https://eips.ethereum.org/EIPS/eip-2098[ERC-2098 short signatures]\n     */\n    function tryRecover(\n        bytes32 hash,\n        bytes32 r,\n        bytes32 vs\n    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {\n        unchecked {\n            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);\n            // We do not check for an overflow here since the shift operation results in 0 or 1.\n            uint8 v = uint8((uint256(vs) >> 255) + 27);\n            return tryRecover(hash, v, r, s);\n        }\n    }\n\n    /**\n     * @dev Overload of {ECDSA-recover} that receives the `r` and `vs` short-signature fields separately.\n     */\n    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {\n        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);\n        _throwError(error, errorArg);\n        return recovered;\n    }\n\n    /**\n     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,\n     * `r` and `s` signature fields separately.\n     */\n    function tryRecover(\n        bytes32 hash,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {\n        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature\n        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines\n        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most\n        // signatures from current libraries generate a unique signature with an s-value in the lower half order.\n        //\n        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value\n        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or\n        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept\n        // these malleable signatures as well.\n        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {\n            return (address(0), RecoverError.InvalidSignatureS, s);\n        }\n\n        // If the signature is valid (and not malleable), return the signer address\n        address signer = ecrecover(hash, v, r, s);\n        if (signer == address(0)) {\n            return (address(0), RecoverError.InvalidSignature, bytes32(0));\n        }\n\n        return (signer, RecoverError.NoError, bytes32(0));\n    }\n\n    /**\n     * @dev Overload of {ECDSA-recover} that receives the `v`,\n     * `r` and `s` signature fields separately.\n     */\n    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {\n        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);\n        _throwError(error, errorArg);\n        return recovered;\n    }\n\n    /**\n     * @dev Parse a signature into its `v`, `r` and `s` components. Supports 65-byte and 64-byte (ERC-2098)\n     * formats. Returns (0,0,0) for invalid signatures.\n     *\n     * For 64-byte signatures, `v` is automatically normalized to 27 or 28.\n     * For 65-byte signatures, `v` is returned as-is and MUST already be 27 or 28 for use with ecrecover.\n     *\n     * Consider validating the result before use, or use {tryRecover}/{recover} which perform full validation.\n     */\n    function parse(bytes memory signature) internal pure returns (uint8 v, bytes32 r, bytes32 s) {\n        assembly (\"memory-safe\") {\n            // Check the signature length\n            switch mload(signature)\n            // - case 65: r,s,v signature (standard)\n            case 65 {\n                r := mload(add(signature, 0x20))\n                s := mload(add(signature, 0x40))\n                v := byte(0, mload(add(signature, 0x60)))\n            }\n            // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098)\n            case 64 {\n                let vs := mload(add(signature, 0x40))\n                r := mload(add(signature, 0x20))\n                s := and(vs, shr(1, not(0)))\n                v := add(shr(255, vs), 27)\n            }\n            default {\n                r := 0\n                s := 0\n                v := 0\n            }\n        }\n    }\n\n    /**\n     * @dev Variant of {parse} that takes a signature in calldata\n     */\n    function parseCalldata(bytes calldata signature) internal pure returns (uint8 v, bytes32 r, bytes32 s) {\n        assembly (\"memory-safe\") {\n            // Check the signature length\n            switch signature.length\n            // - case 65: r,s,v signature (standard)\n            case 65 {\n                r := calldataload(signature.offset)\n                s := calldataload(add(signature.offset, 0x20))\n                v := byte(0, calldataload(add(signature.offset, 0x40)))\n            }\n            // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098)\n            case 64 {\n                let vs := calldataload(add(signature.offset, 0x20))\n                r := calldataload(signature.offset)\n                s := and(vs, shr(1, not(0)))\n                v := add(shr(255, vs), 27)\n            }\n            default {\n                r := 0\n                s := 0\n                v := 0\n            }\n        }\n    }\n\n    /**\n     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.\n     */\n    function _throwError(RecoverError error, bytes32 errorArg) private pure {\n        if (error == RecoverError.NoError) {\n            return; // no error: do nothing\n        } else if (error == RecoverError.InvalidSignature) {\n            revert ECDSAInvalidSignature();\n        } else if (error == RecoverError.InvalidSignatureLength) {\n            revert ECDSAInvalidSignatureLength(uint256(errorArg));\n        } else if (error == RecoverError.InvalidSignatureS) {\n            revert ECDSAInvalidSignatureS(errorArg);\n        }\n    }\n}\n"
    },
    "@openzeppelin/contracts/utils/introspection/IERC165.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (utils/introspection/IERC165.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev Interface of the ERC-165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[ERC].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n"
    },
    "contracts/tools-v1/ServiceTools.sol": {
      "content": "// SPDX-License-Identifier: MIT\npragma solidity 0.8.30;\nimport {IERC20} from \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport {SafeERC20} from \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport {IERC721} from \"@openzeppelin/contracts/token/ERC721/IERC721.sol\";\nimport {Ownable} from \"@openzeppelin/contracts/access/Ownable.sol\";\nimport {Ownable2Step} from \"@openzeppelin/contracts/access/Ownable2Step.sol\";\nimport {ReentrancyGuard} from \"@openzeppelin/contracts/utils/ReentrancyGuard.sol\";\nimport {ECDSA} from \"@openzeppelin/contracts/utils/cryptography/ECDSA.sol\";\n/// @notice Atomic native/token distribution and approved-protocol liquidity calls.\n/// @dev Quotes authorize the full plan, caller, chain, contract and native fee.\n/// Pre-existing contract balances cannot be spent, and temporary allowances are cleared.\ncontract ServiceTools is Ownable2Step, ReentrancyGuard {\n    using SafeERC20 for IERC20;\n    struct FeeQuote {uint256 fee;address treasury;bytes32 referenceId;uint256 expiresAt;uint256 feeEurCents;}\n    struct TokenInput {address token;uint256 amount;}\n    struct ProtocolCall {address target;uint256 value;bytes data;}\n    struct PositionAuthorization {address manager;uint256 tokenId;}\n    bytes32 private constant DOMAIN_TYPEHASH=keccak256(\"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)\");\n    bytes32 private constant QUOTE_TYPEHASH=keccak256(\"OperationQuote(address creator,bytes32 operationHash,uint256 fee,address treasury,bytes32 referenceId,uint256 expiresAt,uint256 feeEurCents)\");\n    address public treasury;\n    address public quoteSigner;\n    bool public paused;\n    mapping(bytes32=>bool) public usedReferences;\n    mapping(address=>bool) public allowedTargets;\n    event OperationCompleted(address indexed creator,bytes32 indexed referenceId,bytes32 indexed operationHash,uint256 fee,address treasury);\n    event ConfigurationChanged(address treasury,address quoteSigner);\n    event TargetChanged(address indexed target,bool allowed);\n    event PauseChanged(bool paused);\n    error InvalidPlan();error UnauthorizedQuote();error QuoteExpired();error DuplicateReference();error PaymentFailed();error BalanceViolation();error UnsupportedTransferTax();\n    constructor(address initialOwner,address treasury_,address signer_) Ownable(initialOwner){_configuration(treasury_,signer_);}\n    receive() external payable {}\n    function _configuration(address treasury_,address signer_) private {if(treasury_==address(0)||signer_==address(0)||treasury_==address(this))revert InvalidPlan();treasury=treasury_;quoteSigner=signer_;emit ConfigurationChanged(treasury_,signer_);}\n    function setConfiguration(address treasury_,address signer_) external onlyOwner {_configuration(treasury_,signer_);}\n    function setPaused(bool value) external onlyOwner {paused=value;emit PauseChanged(value);}\n    function setAllowedTarget(address target,bool allowed) external onlyOwner {if(target==address(0)||target==address(this)||target.code.length==0)revert InvalidPlan();allowedTargets[target]=allowed;emit TargetChanged(target,allowed);}\n    function setAllowedTargets(address[] calldata targets,bool allowed) external onlyOwner {if(targets.length>12)revert InvalidPlan();for(uint256 i;i<targets.length;i++){address target=targets[i];if(target==address(0)||target==address(this)||target.code.length==0)revert InvalidPlan();allowedTargets[target]=allowed;emit TargetChanged(target,allowed);}}\n    function quoteDigest(address creator,bytes32 operationHash,FeeQuote calldata q) public view returns(bytes32){\n        bytes32 domain=keccak256(abi.encode(DOMAIN_TYPEHASH,keccak256(\"RockTheCoinTools\"),keccak256(\"1\"),block.chainid,address(this)));\n        bytes32 body=keccak256(abi.encode(QUOTE_TYPEHASH,creator,operationHash,q.fee,q.treasury,q.referenceId,q.expiresAt,q.feeEurCents));return keccak256(abi.encodePacked(\"\\x19\\x01\",domain,body));\n    }\n    function _authorize(bytes32 operationHash,FeeQuote calldata q,bytes calldata signature) private {\n        if(paused||q.treasury!=treasury||q.referenceId==bytes32(0))revert InvalidPlan();\n        if(block.timestamp>q.expiresAt||q.expiresAt>block.timestamp+300)revert QuoteExpired();\n        if(usedReferences[q.referenceId])revert DuplicateReference();\n        if(ECDSA.recover(quoteDigest(msg.sender,operationHash,q),signature)!=quoteSigner)revert UnauthorizedQuote();usedReferences[q.referenceId]=true;\n    }\n    function _pay(uint256 value,address to) private {if(value!=0){(bool ok,)=payable(to).call{value:value}(\"\");if(!ok)revert PaymentFailed();}}\n    function _finish(bytes32 operationHash,FeeQuote calldata q) private {_pay(q.fee,q.treasury);emit OperationCompleted(msg.sender,q.referenceId,operationHash,q.fee,q.treasury);}\n    function _recipients(address[] calldata recipients,uint256[] calldata amounts) private pure returns(uint256 total){if(recipients.length==0||recipients.length>100||recipients.length!=amounts.length)revert InvalidPlan();for(uint256 i;i<recipients.length;i++){if(recipients[i]==address(0)||amounts[i]==0)revert InvalidPlan();total+=amounts[i];}}\n    function sendNative(address[] calldata recipients,uint256[] calldata amounts,FeeQuote calldata q,bytes calldata signature) external payable nonReentrant {\n        bytes32 operationHash=keccak256(abi.encode(uint8(0),recipients,amounts));_authorize(operationHash,q,signature);uint256 total=_recipients(recipients,amounts);if(msg.value!=total+q.fee)revert InvalidPlan();\n        for(uint256 i;i<recipients.length;i++)_pay(amounts[i],recipients[i]);_finish(operationHash,q);\n    }\n    /// @notice Amounts are gross transfers; a taxed token may deliver less to recipients.\n    function sendTokens(address token,address[] calldata recipients,uint256[] calldata amounts,FeeQuote calldata q,bytes calldata signature) external payable nonReentrant {\n        bytes32 operationHash=keccak256(abi.encode(uint8(1),token,recipients,amounts));_authorize(operationHash,q,signature);_recipients(recipients,amounts);if(token.code.length==0||msg.value!=q.fee)revert InvalidPlan();\n        for(uint256 i;i<recipients.length;i++)IERC20(token).safeTransferFrom(msg.sender,recipients[i],amounts[i]);_finish(operationHash,q);\n    }\n    function execute(TokenInput[] calldata inputs,ProtocolCall[] calldata calls,PositionAuthorization[] calldata positions,FeeQuote calldata q,bytes calldata signature) external payable nonReentrant {\n        bytes32 operationHash=keccak256(abi.encode(uint8(2),inputs,calls,positions));_authorize(operationHash,q,signature);\n        if(inputs.length>6||calls.length==0||calls.length>12||positions.length>4||msg.value<q.fee)revert InvalidPlan();uint256 nativeBaseline=address(this).balance-msg.value;\n        uint256[] memory balances=new uint256[](inputs.length);\n        for(uint256 i;i<positions.length;i++){if(!allowedTargets[positions[i].manager]||IERC721(positions[i].manager).ownerOf(positions[i].tokenId)!=msg.sender)revert InvalidPlan();}\n        for(uint256 i;i<inputs.length;i++){\n            if(inputs[i].token.code.length==0)revert InvalidPlan();for(uint256 j;j<i;j++)if(inputs[i].token==inputs[j].token)revert InvalidPlan();\n            IERC20 token=IERC20(inputs[i].token);balances[i]=token.balanceOf(address(this));if(inputs[i].amount>0){token.safeTransferFrom(msg.sender,address(this),inputs[i].amount);if(token.balanceOf(address(this))!=balances[i]+inputs[i].amount)revert UnsupportedTransferTax();}\n            for(uint256 j;j<calls.length;j++){if(!allowedTargets[calls[j].target]||calls[j].target==address(this))revert InvalidPlan();if(inputs[i].amount>0)token.forceApprove(calls[j].target,inputs[i].amount);}\n        }\n        uint256 callValue;for(uint256 i;i<calls.length;i++){if(!allowedTargets[calls[i].target])revert InvalidPlan();callValue+=calls[i].value;if(callValue>msg.value-q.fee)revert InvalidPlan();(bool ok,bytes memory result)=calls[i].target.call{value:calls[i].value}(calls[i].data);if(!ok){assembly(\"memory-safe\"){revert(add(result,32),mload(result))}}}\n        for(uint256 i;i<inputs.length;i++){\n            IERC20 token=IERC20(inputs[i].token);for(uint256 j;j<calls.length;j++)if(inputs[i].amount>0)token.forceApprove(calls[j].target,0);\n            uint256 balance=token.balanceOf(address(this));if(balance<balances[i])revert BalanceViolation();if(balance>balances[i])token.safeTransfer(msg.sender,balance-balances[i]);if(token.balanceOf(address(this))<balances[i])revert BalanceViolation();\n        }\n        if(address(this).balance<nativeBaseline+q.fee)revert BalanceViolation();_finish(operationHash,q);_pay(address(this).balance-nativeBaseline,msg.sender);\n    }\n}\n"
    }
  },
  "settings": {
    "optimizer": {
      "enabled": true,
      "runs": 200
    },
    "evmVersion": "cancun",
    "viaIR": true,
    "outputSelection": {
      "*": {
        "*": [
          "abi",
          "evm.bytecode.object",
          "evm.deployedBytecode.object"
        ]
      }
    }
  }
}